We pre-configure the gateway, switch, access control, cameras and Wi-Fi into four kits sized by headcount, floor area and tolerance for downtime. Power budget, bandwidth and 30-day recording capacity are already worked out; each kit shows its hardware total, with the managed security fee billed separately. We survey the site before you commit.
Every kit can include GNS CARE monthly monitoring: supported devices provide status and alerts for follow-up, the monitoring scope is confirmed by model, and you still own the hardware.
Four kits by headcount, floor area and downtime tolerance — nothing to spec yourself
PoE budget and the storage for 30 days of recording already sized
Internet, door access and cameras separated by hardware VLANs
Adjust any line — start with the network and add door access or cameras later
Your cart is kept for seven days. At checkout, pay by card (+3.5% surcharge) or by bank transfer / FPS.
MikroTik architecture
A MikroTik backbone connects the whole network
MikroTik routers, switches and access points form the network backbone; compatible CCTV, door access and storage connect on separate VLANs as the site requires.
01
Layer 1 — the MikroTik router
The router runs RouterOS for routing, firewall, VPN and VLANs. Control stays on your premises, so the internal network keeps working when the internet link drops; CCTV and recording are connected separately where required.
02
Layer 2 — the PoE switch
A PoE switch powers and connects the wireless access points. Compatible cameras and door-access equipment can also connect, subject to their power and VLAN requirements. Staff, guests, cameras and door control sit on separate VLANs with firewall rules between them.
03
Layer 3 — the devices
MikroTik access points are managed centrally through RouterOS. Third-party cameras, door access and recording keep their own management systems, while network connectivity, VLANs and PoE are delivered through the MikroTik backbone.
04
No compulsory licensing
MikroTik hardware includes its RouterOS licence with no mandatory annual subscription; routing, firewall, VPN and VLAN features are included. Installation, configuration and GNS CARE are quoted separately.
The core of the MikroTik network is the RouterOS router, switches and wireless access points. Compatible CCTV, door access and recording can attach through the same network, isolated with VLANs and firewall rules.
We plan the backbone for your site, source the hardware, configure it and hand over the port map, VLAN plan and configuration backup. See GNS CARE for the support scope and frequently asked questions for the rest.
Every bundle includes
Four things that never change with the tier
Whichever tier you pick, these four are standard.
01
Site survey and plan
We measure the floor, look at door positions, ceiling height and existing cabling, then adjust the quantities. Nothing is forced into a fixed package.
02
Hardware-level separation
Internet, door access, cameras and guests each get their own VLAN with firewall rules between them. A device that is unplugged or compromised still cannot reach another segment.
03
30 days of recording
Capacity is calculated from the number of cameras and their resolution, and confirmed before delivery. We size and configure the storage; recording carries no monthly fee.
04
Standard interfaces and cable runs
Controller, lock and camera positions and their PoE points are listed and left ready in one pass, so nothing has to be re-opened later.
FAQ
Common questions about the bundles
If your question is not here, just get in touch.
What does a bundle price include?
A bundle has two parts: the one-off hardware at the shop prices in the list and the managed security fee, which is billed on top. The hardware total covers the hardware only, so installation, cabling and configuration are quoted separately, and it excludes renovation work, electrical works and door hardware. The quote lists every model, quantity and unit price.
How are the hardware total and the monthly fee worked out?
The hardware total is every line in the list summed, with MikroTik devices at the shop price. The monthly fee is separate and counted per confirmed supported endpoint, including MikroTik network equipment and compatible CCTV, recorder, door-access or IP-phone systems with a readable interface. GNS CARE Essential is from HK$800 a month and Complete from HK$2,000 a month on a 12-month minimum term. The figure on each card is an estimate; final quantities and pricing are confirmed in writing after the site assessment.
What is the difference between the four kits?
The 1–5 person bundle uses RB5009UG, CSS610 and one hAP ax²; the 5–20 person bundle uses RB5009UG, a CRS328 PoE switch and three hAP ax² access points; the 20+ bundle uses RB5009UPr, two CRS328 switches and six hAP ax² access points. The fourth is a dual-router HA network bundle with two RB5009UG routers, one CRS310 and two hAP ax² access points. CCTV, door access and storage are quoted separately as required.
Can we do only part of it?
Yes. The four kits are a starting point — start with the network and Wi-Fi, and leave door access and cameras for a later phase.
Can models or quantities be changed?
Yes. You can add hAP ax² or hAP ax³ access points, increase PoE switch capacity, or add compatible CCTV, door access and storage separately. We re-check the power budget and network capacity in the quote.
How is 30 days of recording calculated?
Daily write volume is estimated from camera count, resolution and recording mode, then multiplied by 30. Four 2K cameras need roughly 4TB; eight mixed 2K and 4K cameras need about 8TB. Office incidents are often noticed days or weeks later, so 30 days gives you room to look back.
Does MikroTik need an annual licence?
No. MikroTik hardware includes its RouterOS licence with no mandatory annual subscription; routing, firewall, VPN and VLAN features are included. Installation, configuration and GNS CARE managed services are quoted separately.
Is every item in the bundle in the online shop?
Yes. Every MikroTik hardware line maps to the same model, specifications and indicative price in the shop, so you can compare or add items later — the bundle hardware price is simply the total of the lines in the list.
What is the lead time and handover process?
We confirm lead time within one working day. Once the hardware is on site the GNS engineering team configures the network, VLANs, door access and recording, and hands over the port map, rack layout, admin credentials and a configuration backup.
How does warranty work?
Hardware carries the manufacturer warranty and we handle the Hong Kong claim. On a managed plan, configuration issues and day-to-day follow-up sit with the same GNS engineers.
What if we have not chosen a kit yet?
Start with a free site assessment. We measure the floor, review door positions and existing cabling, then produce an indicative list and price you can compare against other quotes.
Want a bundle quoted?
Send us a floor plan or photos of the door positions and we will come back with a first-cut list and indicative pricing before booking the site visit.