Skip to main content
GNS MikroTik logo

GNS CARE ─ managed service hub

GNS CARE managed service

A MikroTik network backbone with compatible CCTV, door access and intercom systems, managed on a monthly fee according to the confirmed device scope. We plan, install and support the service.

Unlike break-fix support: supported equipment is read through its native management interface or API, with status and events sent over an encrypted channel to our cloud platform for analysis. The available telemetry, alerts and replacement arrangements depend on the model and integration scope.

  • One monthly service covering the MikroTik network backbone plus compatible CCTV, door access and intercom systems
  • Essential from HK$800/month, Complete from HK$2,000/month, priced per device endpoint
  • Remote monitoring, firmware and security updates and a monthly report; Complete adds a one-hour response SLA and a 24-hour hardware swap
  • Minimum 12-month term at a fixed monthly fee, and you own the hardware
MikroTik router and switch VLAN segmentation

Monthly fee calculator

Work out your GNS CARE monthly fee

Enter your device counts and pick a tier to see the monthly fee.

Step 1: Count your devices

Nothing of a type? Leave it at 0.

Step 2: Choose a tier

Step 3: Add security hardening (optional)

What we manage

Network, CCTV, access and security under one plan

One monthly fee, one team. You own the hardware; we keep it running.

CCTV (CCTV)

Cameras, recorders, drive health and retention — you hear about it the moment recording stops.

Network security (firewall, VPN)

Firewall rules, site-to-site VPN and outbound monitoring; the hardening add-on feeds device data into our SIEM and adds a monthly security audit report.

What makes us different

From monitoring to condition-led maintenance

Traditional support reacts after hardware fails. For supported devices that expose readable data, we compare status, alerts and long-term trends to arrange inspection or replacement; actual capability depends on the model and system.

  1. Read through supported management interfaces

    Supported equipment is read through its native management interface or API; the available status and event fields depend on the exact model and third-party system.

  2. Encrypted to our own cloud platform

    Logs are encrypted in transit to our own cloud platform, where only authorised engineers can read them.

  3. SIEM analysis, 24/7

    A SIEM correlates events and trends around the clock instead of firing single alerts, so odd behaviour surfaces immediately.

  4. Analysis against a long-term baseline

    For supported devices with a readable interface or API, status and events are compared with their long-term baseline, and engineers follow up alerts and abnormal trends. Equipment without usable telemetry is not treated as having the same monitoring capability.

  5. It names the failing unit, and suggests the fix

    The platform points at the devices about to fail and proposes what to change — repositioning an AP, separating high-traffic devices, or replacing a drive that is wearing out.

  6. Predictive swap, before failure

    When a drive, power supply or link trends the wrong way we arrange the repair or the swap before the hardware dies — far less downtime than waiting for a dead unit.

What we cover

Six areas we always work through

Each one stands alone. We assess first, then rank the work by risk.

Network segmentation (VLANs)

Staff, guests, IoT and POS each get their own segment, so a breach in one cannot move sideways.

Firewall and threat management

Segment rules, geo-blocking and IPS/IDS signatures on the MikroTik gateway, with alerts reviewed on a schedule. On another brand of firewall we apply the equivalent rules its feature set supports.

Site-to-site VPN

Office, warehouse and shops join one private network, so cross-site systems never face the public internet.

Guest Wi-Fi and portals

Guests get their own network, with session limits, bandwidth caps and a terms-of-use page.

Remote access and identity

VPN and per-person accounts replace shared passwords, and access is revoked the day someone leaves.

Monitoring, logs and alerts

Traffic, logins and device state recorded in one place and analysed continuously in our SIEM, with email or push alerts the moment something changes.

Risk and response

Common holes, and what we do about them

These are the issues that come up most often in small and mid-sized offices.

  1. Everything on one network

    Guest phones sharing a segment with the till means a compromised guest device can reach internal systems. We split by purpose and restrict traffic between segments with firewall rules.

  2. A firewall nobody has touched

    Wide-open ports, vendor admin pages still reachable from the internet, logins for people who left. We review each one and narrow what is exposed.

  3. Remote access by shared password

    A shared TeamViewer or VPN login lets staff work from home, but cannot be taken back cleanly. Per-person accounts with an audit trail can be revoked one at a time.

  4. Devices exposed to the internet

    Opening ports so a technician can work remotely leaves devices permanently exposed. We move access behind VPN or a central controller instead.

  5. No records, no answers

    Without logs you cannot tell who signed in, or when. Once logging and alerts are on, you can at least answer "when did it start" and "where did it come from"; the hardening add-on adds a monthly security audit report for audit and compliance queries.

Included and not included

Essential versus Complete: what each one covers

Both tiers cover the managed core; Complete adds a one-hour response commitment, a 24-hour hardware swap and on-site cover. The hardening add-on applies to either tier.

Essential versus Complete: what each one covers
GNS CARE Essential HK$800 /month from Remote GNS CARE Complete HK$2,000 /month from SLA and swaps
Monitoring, updates and reporting
24/7 remote monitoring and alerts GNS CARE Essential Included GNS CARE Complete Included
Firmware and security updates GNS CARE Essential Included GNS CARE Complete Included
Configuration backups GNS CARE Essential Included GNS CARE Complete Included
Monthly report GNS CARE Essential Included GNS CARE Complete Included
Network, CCTV, access and intercom all in scope GNS CARE Essential Included GNS CARE Complete Included
Support and response
Unlimited remote support GNS CARE Essential Included GNS CARE Complete Included
SLA response guarantee (within one hour) GNS CARE Essential Not included GNS CARE Complete Included
Emergency call-outs GNS CARE Essential Not included GNS CARE Complete Unlimited
Loan hardware and swap (within 24 hours) GNS CARE Essential Not included GNS CARE Complete Included
Quarterly review GNS CARE Essential Not included GNS CARE Complete Included
CCTV and storage
Drive health and retention checks GNS CARE Essential Included GNS CARE Complete Included
CCTV health monitoring GNS CARE Essential Not included GNS CARE Complete Included
Security hardening (add-on)
VLAN separation review GNS CARE Essential Add-on GNS CARE Complete Add-on
Firewall rule audit GNS CARE Essential Add-on GNS CARE Complete Add-on
Outbound connection monitoring GNS CARE Essential Add-on GNS CARE Complete Add-on
Monthly security audit (compliance) report GNS CARE Essential Add-on GNS CARE Complete Add-on

Scope and contract

The monthly fee is priced per device endpoint (gateway, switch, AP, camera, recorder, access and Talk), with a minimum of HK$800/month on Essential and HK$2,000/month on Complete. You buy and own the hardware; warranties follow the manufacturer terms. Managed services run on a minimum 12-month term at a fixed monthly fee — no per-visit charges. Adding or removing devices is pro-rated on the next invoice, and the exact scope and SLA details (Complete: one-hour response, failed hardware swapped within 24 hours) are confirmed in writing on the quote.

From signing to live

Five steps to get managed

From choosing a tier to your first device health and security report, usually within two to four weeks.

  1. Choose your tier

    You pick Essential or Complete, adding security hardening if you want it. The monthly fee is priced per device endpoint with a minimum, and it is fixed once the contract is signed.

  2. Add GNS to your MikroTik management team

    You invite the GNS account from MikroTik RouterOS management interface and confirm it — about ten minutes, with no software to install and no inbound ports to open. The six steps are shown with screenshots in the next section.

  3. Confirm the scope, then the first device health and security report

    We check the device inventory against the agreed scope, record a health baseline for every endpoint, recorder and drive, and send a first report: existing risks, configuration issues, hardware that needs replacing and the order to handle them in.

  4. A walkthrough with you

    We go through the report together, agree what to fix straight away and what moves into the managed service, and tune the alert thresholds and notification routes to how you actually work.

  5. Steady-state monthly report

    A report every month, plus tier-level follow-up on device health, incident handling, security updates and any replacement or re-tuning that needs a visit.

FAQ

GNS CARE managed service: common questions

These come up most often. Anything else, just get in touch.

How is the monthly fee worked out?

It is priced per device endpoint: gateways, switches, APs, cameras, recorders, access and Talk each carry a monthly rate, with a minimum of HK$800/month on Essential and HK$2,000/month on Complete. The calculator above gives you an instant estimate; the final figure is confirmed in writing after the free site survey.

How do you actually watch our equipment?

Supported devices expose status and events through their native management interface or API. Those records travel over an encrypted channel to our cloud platform, where monitoring and analysis compare them with a long-term baseline. The readable fields, alerts and predictive capability vary by model and third-party system; we state the actual monitored scope in writing after assessment rather than treating unavailable data as monitorable.

How does GNS Care differ from a manufacturer warranty?

A manufacturer warranty only reacts after hardware fails: you spot the fault, raise the case, wait for parts or an RMA, and carry the downtime. It covers the hardware alone, not configuration, updates, backups or day-to-day support. GNS CARE is a monthly managed service covering supported device status, alert handling, firmware updates, configuration backup and a monthly report; Complete adds a one-hour response SLA and a 24-hour replacement. You still own the hardware and the manufacturer warranty stays valid.

Can we manage only part of the system?

Yes. Scope is counted per endpoint, so CCTV on its own, or just the Wi-Fi, is fine — the fee follows the actual count.

Do we rent or buy the hardware?

You buy it and you own it; warranties follow the manufacturer terms. If your existing MikroTik kit is still suitable we just take over management — no need to replace it.

What is the difference between Essential and Complete?

Essential is remote management: 24/7 monitoring and alerts, firmware and security updates, configuration backups, unlimited remote support and a monthly report. Complete adds the one-hour response SLA, a 24-hour hardware swap, unlimited emergency call-outs, a quarterly review and CCTV health monitoring.

What is the security hardening add-on?

A flat HK$500 a month for a VLAN separation review, a firewall rule audit and outbound connection monitoring, with follow-up in the monthly report. Supported devices that expose a readable management interface or API can feed approved operating data into our SIEM; the monthly security audit covers the device state, firewall rules and alerts that are actually readable.

Can you see our footage?

For monitoring we hold device management access only, to read health status and alerts. Unless you ask us to deal with a specific incident we do not review recordings; reports show uptime, drive health and event logs.

What if we are not on MikroTik?

We can support compatible equipment from other brands, but the readable functions depend on whether the vendor provides an API, a remote-management interface or another integration. Without one, support is limited to on-site work, alert follow-up and limited remote assistance. We assess first and state the achievable monitoring scope for each system in writing.

What happens after 12 months?

The contract rolls on month to month after the initial term, and you can end it with one month notice. Adding or removing devices is pro-rated on the next invoice — no need to re-sign.

We already have a firewall — why do we need you?

We look at this from two angles: cost and stability. Most commercial firewalls charge an annual or monthly licence to keep receiving updates, while MikroTik firmware and feature updates are free and continuous. Add monitoring, alerting, firmware updates, configuration backup and status data read from compatible equipment, plus a team that has delivered projects for government departments, public bodies, schools and rail operators since 2019. The exact monitored scope and SLA are stated in the quotation.

Will the work disrupt the office?

Segments and rules are tested outside office hours first, and only applied once the tills, printers and shared folders are confirmed working. The cut-over happens in a window you choose.

Do we have to replace all our equipment?

Not necessarily. Existing equipment can be assessed for continued use where it meets the required function, security and manageability. Replace it when more throughput or capability is required. If another brand stays, we state whether it exposes a readable management interface or API and what monitoring is actually possible.

What happens if we get ransomware?

We provide a post-incident review, containment advice and a remediation plan, and can coordinate with your IT provider. Live incident response is a separate arrangement, but we will help you size the impact first.

Can we start with just an assessment?

Yes. You get a risk list with prioritised actions. Work through it yourself, or hand the items back to us one at a time.

Why is this charged monthly instead of as a one-off project?

Security does not end at handover: firmware and signatures update weekly, staff and devices change, and new vulnerabilities keep appearing. On a monthly plan we harden the network at handover and then keep monitoring, updating and following up. MSSP, backup and disaster recovery, and IT support can be added item by item.

Do you supply the hardware or should we buy it?

Either way works. Most clients let us supply the access points, switches and gateways so warranty, licensing and configuration stay in one place, but we will configure equipment you already own if it fits the design.

Can cabling work be done without closing the office?

Yes. Ceiling and trunking work is usually done outside business hours, with the noisy stages scheduled for evenings or weekends. Network cutover is planned for a window you choose.

Do you charge for the site survey?

The survey is free within Hong Kong Island, Kowloon and the New Territories, and there is no obligation to proceed. You keep the findings either way.

What areas do you cover?

Our on-site service covers all of Hong Kong — Hong Kong Island, Kowloon and the New Territories. Outlying islands and remote locations are quoted individually because of travel time.

Want to try AI-driven managed care built in-house by GNS?

Contact us for a free check: we review how your current devices are actually running, then arrange a one-month free trial.

Chat on WhatsAppEmail us