Skip to main content
GNS MikroTik logo

Wi-Fi 7 vs Wi-Fi 6: why 6 GHz needs OFCA approval in Hong Kong

GNS Engineering Team 3 min read

The Wi-Fi 7 versus Wi-Fi 6 question has two separate parts: the wireless standard and the frequency band available in your market. Wi-Fi 7 introduces new ways to improve throughput and efficiency, but not every Wi-Fi 7 device has a 6 GHz radio. Even when the hardware includes 6 GHz, the exact model must meet OFCA type-approval and operating conditions in Hong Kong.

What actually changes from Wi-Fi 6 to Wi-Fi 7

Feature Wi-Fi 6 Wi-Fi 7
Standard IEEE 802.11ax IEEE 802.11be
Maximum channel width 160 MHz 320 MHz
Highest modulation 1024-QAM 4096-QAM
Multi-band operation Traffic can be distributed across dual-band or tri-band radios Multi-Link Operation (MLO) can coordinate multiple wireless links
Spectral efficiency OFDMA OFDMA, Multi-RU and spectrum puncturing

320 MHz channels and 4096-QAM can raise theoretical throughput, but clients, signal quality and available spectrum must support them for the benefit to materialise. MLO is not only about peak speed: it can coordinate 2.4, 5 and 6 GHz links to improve latency and connection resilience. For most offices, real performance still depends on AP density, channel planning, client count and the wired uplink rather than the AX or BE number on the box.

6 GHz is not the same as Wi-Fi 7

Wi-Fi 6E and some Wi-Fi 7 devices add 6 GHz, but the Wi-Fi 7 standard does not guarantee a 6 GHz radio. A Wi-Fi 7 product may be dual-band 2.4 / 5 GHz, or tri-band with 6 GHz.

Radio equipment using 6 GHz in Hong Kong is regulated by OFCA. Before deployment, check the exact model against OFCA's type-approval information and permitted operating conditions. Do not rely only on a product family name, an overseas specification sheet or the words “Wi-Fi 7”. If a model does not have the applicable local approval, do not enable its 6 GHz radio in Hong Kong. Parallel imports should also be checked by exact model and approval; do not assume they match local stock.

MikroTik Wi-Fi models currently in our shop

Model Part number Wireless standard Bands
hAP ax² C52iG-5HaxD2HaxD-TC Wi-Fi 6 2.4 / 5 GHz
hAP ax³ C53UiG+5HPaxD2HPaxD Wi-Fi 6 2.4 / 5 GHz

Both are dual-band Wi-Fi 6 routers with no 6 GHz radio; they are not Wi-Fi 6E or Wi-Fi 7 devices. Their wireless operation uses 2.4 / 5 GHz. Any other applicable local radio regulations and product instructions still apply.

As of October 2026, our shop does not list a Wi-Fi 7 MikroTik model. Rather than presenting “Wi-Fi 7” as a general selling point, we label each product by its actual wireless generation and supported bands.

Should you buy Wi-Fi 6 or wait for Wi-Fi 7?

If your devices are mainly phones, laptops and general office equipment, and your 5 GHz coverage and wired uplink are already adequate, a dual-band Wi-Fi 6 router such as the hAP ax² or hAP ax³ remains a practical choice. Neither requires 6 GHz band planning for certification purposes, which can keep deployment and management simpler.

A Wi-Fi 7 upgrade usually makes more sense when several conditions line up: the clients support Wi-Fi 7, the site needs more 5 or 6 GHz capacity, the wired and internet uplinks will not be the bottleneck, and there is a clear high-density or low-latency requirement. Replacing the AP alone will not deliver the expected gain if the clients do not support the newer capabilities.

Further details

For help selecting a model based on floor area, user count and the existing network, contact GNS for configuration and quotation advice.

Frequently asked questions

Does every Wi-Fi 7 device support 6 GHz?

No. Wi-Fi 7 is a wireless standard. Some products are dual-band 2.4 / 5 GHz, while others add 6 GHz. Check the device's actual radio specification rather than relying only on the Wi-Fi 7 label.

What happens if a 6 GHz device has no OFCA approval?

Do not enable the device's 6 GHz radio. Check the exact model against OFCA's type approval and operating conditions before deployment, and do not assume a parallel import is the same as local stock.

Are the hAP ax² and hAP ax³ Wi-Fi 6E or Wi-Fi 7?

No. Both are dual-band Wi-Fi 6 routers supporting 2.4 / 5 GHz, with no 6 GHz radio. Our shop labels them by their actual specification and does not describe them as Wi-Fi 6E or Wi-Fi 7.

How can I check a model's Hong Kong type approval?

Check the exact model and operating conditions in OFCA's approved-equipment information. You can also ask the seller for the local approval details for that model.

Chat on WhatsAppEmail us